System 100m outputs

Tutorials, Explanation and Discoveries
Posts: 12
Joined: Wed Sep 26, 2012 9:06 am
Location: GREECE

System 100m outputs

Postby bellerophone » Wed May 15, 2013 5:24 pm

Hi can anyone explain whats the main system 100m's outputs?
There is a stereo rca out on the back and then a Jack A-B , 1-2
matrix on the 191J module both work.
I cant figure out if there is a default connection or its a matter of choice
for example send vco1 - filter 1 - vca 1---left out and
vco2 - filter2 - vca 2 ----right out
having two different sounds on 2 channels...

any help appreciated

Posts: 117
Joined: Wed Sep 26, 2007 2:14 pm
Location: London

Postby ryk » Sat May 18, 2013 1:09 pm


The A or B, are on the same connection to the RCA on the back.
It just means use 3.5mm of A or 1/4 inch for B.

So jack 1A and 1B connect to RCA 1 on the back, and jack 2A and 2B connect to RCA 2 on the back.

I use a M131 output mixer, with it's stereo outputs connected to the
jacks 1a and 2a, with the RCA.s on the back connected to my main mixer.

Hope that helps.


Return to “Patching”

Who is online

Users browsing this forum: No registered users and 1 guest