System 100m outputs

Tutorials, Explanation and Discoveries
bellerophone
Posts: 12
Joined: Wed Sep 26, 2012 9:06 am
Location: GREECE
Contact:

System 100m outputs

Postby bellerophone » Wed May 15, 2013 5:24 pm

Hi can anyone explain whats the main system 100m's outputs?
There is a stereo rca out on the back and then a Jack A-B , 1-2
matrix on the 191J module both work.
I cant figure out if there is a default connection or its a matter of choice
for example send vco1 - filter 1 - vca 1---left out and
vco2 - filter2 - vca 2 ----right out
having two different sounds on 2 channels...

any help appreciated

ryk
Posts: 117
Joined: Wed Sep 26, 2007 2:14 pm
Location: London
Contact:

Postby ryk » Sat May 18, 2013 1:09 pm

Hello

The A or B, are on the same connection to the RCA on the back.
It just means use 3.5mm of A or 1/4 inch for B.

So jack 1A and 1B connect to RCA 1 on the back, and jack 2A and 2B connect to RCA 2 on the back.

I use a M131 output mixer, with it's stereo outputs connected to the
jacks 1a and 2a, with the RCA.s on the back connected to my main mixer.

Hope that helps.

-ryk


Return to “Patching”

Who is online

Users browsing this forum: No registered users and 1 guest

cron